Fontaine 60 Lcc

Fontaine rolls out Heavy-Haul Magnitude 60LCC

July 24, 2020
Newest lowbed handles 60 tons with 18-inch deck height

Lowbed specialist Fontaine Heavy-Haul is introducing a new trailer that hauls 60 ton loads in 13' with 4 axles close coupled—the new Fontaine Magnitude 60LCC. The Fontaine Magnitude 60LCC is designed for customers operating in regions where spread axle configurations are not required to maximize their trailer loads.

“If local regulations allow a more concentrated load this trailer is a great choice,” Todd Anderson, vice president, sales and marketing, says. “It can handle 60 tons without adding a flip box or a spreader. This means our customers get a much lighter trailer setup at a much lower acquisition cost.

“Plus, maneuverability is greatly improved since the overall length is reduced by more than 11 feet compared to a trailer equipped with a flip box, spreader, and 4th axle. With its 60 ton capacity and 18" deck height, this trailer is a winner.”

However, should the application require a spread axle configuration, the Magnitude 60LCC is ready and able, according to Fontaine. It is designed to accept a 23" flip box and a Fontaine EQ1 spreader with a 4th axle. In this configuration, the trailer can haul 55 tons in 16' with a 125" swing radius.

Fabricated with 100,000# minimum yield steel flanges, the Magnitude 60LCC is built tough and designed to provide years of reliable service. The trailer boasts a true 26' clear deck length and a loaded deck height of 18" with 6" of ground clearance. It features the most versatile hydraulic removable gooseneck in the industry; it can be connected and disconnected in a matter of seconds… not minutes, and it can connect/disconnect on uneven ground, according to Fontaine.. 

For more information, visit