Product Profiles

Chelsea introduces PTO for Cat transmissions

Chelsea Products Division of Parker Hannifin has announced the release of its CAT-H Series Powershift PTO for the rear-mount opening on Caterpillar transmissions.

This is the first Powershift PTO to be designed in conjunction with Caterpillar specifically for Cat's new CX Series transmissions. The PTO delivers 335 lb ft of torque for both continuous and intermittent applications at 125% of engine speed. It comes available with the Chelsea Wetspline output option to help eliminate spline fretting. Parker Hannifin Corp, Chelsea Products Div, Olive Branch MS.

Pickup toolbox slides to the side

A new pickup tool box from Taylor Wings slides to the side, over the pickup side rails, for easier access to the tool tray. The top-opening box slides on self-lubricating Nylatron rollers, sliding 48” to either the driver side or passenger side. This sliding to the side also opens the bottom portion of the box for storage of larger tools. Demonstrating the Pro-Slide is Robert Grafton. Taylor Wings Inc, 3720 Omec Cir, Rancho Cordova CA 95742.

TramBed slides cargo to rear

The TramBed was developed to move cargo out of a van body or enclosed pickup so that it can be unloaded easier by hand or fork truck. For service work at the customer site, this truck bed extension can provide a larger work bench than the open tailgate. The stainless steel I-beam frame has a 2,500 lb capacity rating. It slides out on eight sets of sealed industrial strength roller bearings. TramBed, a division of Hebert Enterprises, 6619 132nd Avenue NE, #162, Kirkland WA 98033.

Maxon Lift celebrates 50 years

Maxon Lift Corporation is celebrating its 50th year in business.

Maxon was founded in 1957 by Max Lugash in a suburb of Los Angeles, California. Now in the third generation of leadership, Maxon remains a family company, yet it sells its line of Tuk-A-Way and Column liftgates worldwide. Maxon Lift Corp, Santa FE Springs CA.

Todco rolls for 50 years

Representatives of Todco were rocking and rolling at The Work Truck Show to commemorate 50 years in producing roll-up doors. Established in 1957, Todco is a division of The Overhead Door Corporation. Headquartered in Marion, Ohio, Todco serves customers from four plants in Ohio and California.

Side braces support telescopic cylinder

A new method of adding stability to a raised dump body was introduced at the NTEA by Champion Hoist and Equipment. Cylinder support braces clamp around the cylinder to guide it and maintain it perpendicular to its mounting base. The patent-pending support pivots on the same shaft as the hydraulic cylinder. Pat Godwin (pictured) says that it was tested with a 12,000-lb load on one side of the body only. The 16-ft dump body deflected only 6" to the side when raised to a 35-degree dump angle. Champion Hoist and Equipment, 200 Champion Drive, Dunn NC 28334.

Hide comments

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish